Argon Audio TT MK2 BT – Wireless Vinyl Without the Fuss

The Argon Audio TT MK2 BT takes the TT MK2 formula, the same belt-drive deck with a built-in RIAA stage and a pre-mounted Audio-Technica AT3600L, and adds Bluetooth 5.4 with aptX and aptX HD. Pair it with a wireless speaker or headphones and the turntable can sit where it looks best, not where the cables reach. The RCA output stays on board for a classic wired setup. At Soundium it is the simplest way to put a record on and let the room do the rest.

Key Features

• Bluetooth 5.4 with aptX and aptX HD: Streams your records to wireless speakers, headphones or a Bluetooth-equipped stereo with high-quality codec support.
• Wired or wireless playback: RCA output stays on board, so you can connect to an amplifier or active speakers whenever you prefer a cable.
• Built-in RIAA preamp: Plug straight into line inputs, no separate phono stage required.
• Pre-mounted Audio-Technica AT3600L: Factory-fitted moving magnet cartridge, aligned and ready to play.
• Auto stop: The platter stops at the end of the side, so a forgotten record does not keep spinning.
• Iron platter with sub-platter drive: 1.8 kg platter on a ball bearing for steady speed and low resonance.
• Five finishes: Black matte lacquer, Walnut veneer, Pine Green, Atlantic Blue and Electric Amber lacquer, matching the Fenris speaker range.

Customer Benefits

Most entry-level turntables force a choice: cables and a proper preamp, or Bluetooth convenience. The TT MK2 BT gives you both in one plinth. A first vinyl setup can start with a single Bluetooth speaker and grow into a wired hi-fi system later without replacing the deck. The manual tonearm and 3.5 g tracking force are the same as on the TT MK2, so the sound character stays, and auto stop makes it a comfortable everyday player.

Quick Specs

• Wireless: Bluetooth 5.4, aptX and aptX HD
• Cartridge: Audio-Technica AT3600L (MM), pre-mounted
• Speeds: 33 ⅓ / 45 RPM
• Drive Type: Belt, sub-platter design
• Platter: Iron, 1.8 kg, ball bearing
• Plinth Material: MDF
• Tonearm: Aluminium, 8.6″ effective length, 8 g effective mass
• Acceptable Cartridge Weight: 3 – 6 g
• Tracking Force: 3.5 g (recommended)
• Phono Preamp: Built-in RIAA
• Wow & Flutter: ≤ 0.06%
• Signal-to-Noise Ratio: 55 dB
• Speed Variation: ±1.5%
• Operation: Manual with auto stop
• Dimensions (H × W × D): 12.5 × 42 × 36 cm
• Weight: 6.2 kg (net) / 7 kg (gross)
• Power Consumption: 5 W

In the Box

• Argon Audio TT MK2 BT turntable
• Pre-mounted Audio-Technica AT3600L cartridge
• Power supply (1.8 m)
• RCA cable (1.5 m)
• Dust cover

Use Cases / Ideal For

A first turntable paired with a Bluetooth speaker in a living room or bedroom, a second deck for a kitchen or office where cables are a nuisance, or a vinyl source for wireless headphone listening. With Fenris A4 or A5 active speakers it makes a complete system in matching colours.

Pros & Cons

✅ Pros:

• Bluetooth 5.4 with aptX HD and a wired RCA output in the same deck
• Built-in RIAA preamp and factory-mounted cartridge, ready out of the box
• Auto stop at the end of the record
• Five finishes that match the Fenris speaker range

⚠️ Cons:

• Manual tonearm operation (auto stop only, no auto return)
• Bluetooth sound quality depends on the codec your speaker or headphones support

The TT MK2 BT is the TT MK2 for people who would rather not run cables across the room. Same deck, same cartridge, same built-in phono stage, plus a wireless link that is good enough to live with. You will find it at Soundium in all five finishes.