Mackie Thrash12v2 – 1300 W Powered PA Loudspeaker with DSP and Bluetooth
The Mackie Thrash12v2 is a 12-inch active loudspeaker for bands, solo performers and mobile DJs who want a PA that works without a sound engineer behind it. It keeps the 1300 W amplifier and the plain, rugged cabinet the Thrash line is known for, and adds the DSP that used to start higher up the Mackie range: four voicing modes, a one-button Feedback Eliminator and Bluetooth streaming with wireless speaker linking — available at Soundium.
Key Features
-
1300 W amplifier: 129 dB maximum SPL with an overload limiter and status LED, enough for rehearsal rooms, bars and small outdoor sets.
-
12″ woofer + 1″ tweeter: 53 Hz to 16 kHz, voiced so vocals and instruments cut through a loud room.
-
Four voicing modes: Flat, DJ, Live and Wedge, cycled with a single hardware button and read off four LEDs. No app, no menus.
-
Feedback Eliminator: One button that detects and suppresses microphone feedback, for tight stages where the mic has to work close to the cabinet.
-
Bluetooth streaming and linking: Press to pair a phone or laptop, hold to link a second cabinet in stereo or dual mono. The wired input stays live while a backing track streams.
-
XLR mix output: Passes both the wired input and the Bluetooth signal, so a chained cabinet gets the full mix.
-
Wedge cabinet and pole cup: Tip it on its side as a stage monitor, or mount it on a tripod or a pole above a subwoofer. Built-in handles and a protective grille.
Customer Benefits
Everything on the Thrash12v2 is a knob or a button on the back panel, so the sound is set at load-in and nothing needs updating before the doors open. At 13.9 kg it is a one-hand carry up a flight of stairs, and the single combo input takes a microphone or a line source directly, which means a duo with a mic and a phone needs no mixer at all.
Quick Specs
-
Power: 1300 W amplifier
-
Drivers: 12″ low-frequency woofer, 1″ tweeter
-
Maximum SPL: 129 dB
-
Frequency response: 53 Hz to 16 kHz
-
Inputs: 1 × XLR/TRS combo with mic/line switch and gain, Bluetooth
-
Outputs: XLR mix output, carries the input and the Bluetooth stream
-
DSP: Flat, DJ, Live and Wedge voicing modes, Feedback Eliminator, overload limiter
-
Mounting: Pole cup with tightening screw, dual-purpose wedge cabinet
-
Service port: USB-C, firmware updates only
-
Dimensions: 61.4 × 35.3 × 34.8 cm
-
Weight: 13.9 kg
What's in the Box
- Mackie Thrash12v2 powered loudspeaker
- IEC power cable
- Quick Start Guide
Use Cases / Ideal For
Rehearsal rooms, small live bands, solo singers with backing tracks, mobile DJs doing bars and private parties, schools and presentations, and anyone who needs a stage monitor and a front-of-house cabinet from the same box.
Compatibility
Sits on the Mackie SPM400 speaker pole above a Thump15Sv4 or Thump18Sv4 subwoofer, or on a T100 tripod stand. Accepts any microphone, line or instrument signal through the XLR/TRS combo input. Bluetooth streams from any phone, tablet or laptop, and two Thrashv2 cabinets link wirelessly to each other. Fitted speaker bags are available separately.
Pros & Cons
✅ Pros:
- Voicing modes and Feedback Eliminator at the entry price point
- Everything set from the rear panel, with no app in the chain
- Bluetooth link between two cabinets for stereo without a cable run
- 13.9 kg with built-in handles and a wedge cabinet
⚠️ Cons:
- One input only, so two live sources need an external mixer
- No fly points, so it cannot be rigged from a truss
- No app control and no aux jack, unlike the Thumpv4 range above it
The Mackie Thrash12v2 is the straightforward answer for a band or a performer who wants a PA that turns on and works. Add a second cabinet over Bluetooth for stereo, or a Thumpv4 subwoofer underneath for low end — available at Soundium.
